1.jpeg

The chin helps define the center of the lower face from the front, and from the side, it plays an important role in the line that connects the nose, lips, and chin.

 

So when the chin tip is short or set back, the face can look rounder than it actually is, the mouth area may appear relatively more protruded, and the lower facial line can look less defined.

 

On the other hand, when the chin tip gains appropriate support, the lower face has a clearer finishing point. This can make the frontal contour look slightly sharper and the lower face line more refined from the side.

 

Today, I will explain how chin filler can change the face shape in an easier way by looking at before-and-after photos from our clinic along with clinical research data :)

 

What is chin filler?

2.png

Chin filler is a procedure that injects hyaluronic acid filler or similar materials into the chin tip, also called the chin or mental region, to improve chin length, forward projection, symmetry, and the lower facial line.

 

However, the important point here is that it is not about making the chin longer unconditionally.

 

Some people need more vertical length because the chin tip is short, while others need more forward support because the chin is set back.

 

In some cases, the issue is not only a lack of volume in the center of the chin. The side lines may look spread out, the mental crease below the lower lip may look deep, or the chin muscle may be overly tense, creating a pebbled chin appearance.

 

That is why chin design needs to be assessed from both the front and the side.

 

From the front, we check whether the face looks too round, whether the chin tip appears shifted to one side, and how the length and width of the lower face look.

 

From the side, we need to evaluate the line connecting the nose, lips, and chin tip, as well as the border that continues from the chin to the neck.

 

In the end, chin filler is not simply a procedure that “pushes the chin forward.” It is closer to a design-based procedure that balances the center and proportion of the lower face.

 

What changes can we see in the before-and-after photos?

3.png

In the frontal before-and-after photo above, before treatment, the downward support of the chin tip appears relatively weak, and the lower face seems to end in a slightly short and rounded shape.

 

After treatment, the chin tip is slightly more defined downward, creating a clearer center in the lower face.

 

The key point here is not that the chin became excessively long.

 

Rather, the endpoint of the lower face became more defined, making the overall contour look clearer.

 

When the chin tip is too short or indistinct from the front, the face can look wider and rounder.

 

In this type of case, when appropriate volume is added to the chin tip, the face shape can look slightly more vertically refined, and the lower facial line may appear less spread out.

4.png

In the second side-profile before-and-after photo, the change is more intuitive.

 

Before treatment, the line from below the lips to the chin tip appears slightly recessed, and the forward support of the chin tip looks insufficient.

 

After treatment, the chin tip becomes slightly more projected, making the lower facial line in the side profile look clearer.

 

Especially when the relationship between the lips and chin tip is improved, the mouth area can appear visually less protruded, even though this is not actual dental or skeletal correction.

 

Of course, this does not mean that all protruding mouth or skeletal issues can be solved with filler.

 

However, when the mouth area looked relatively more protruded because the chin tip was retruded, appropriate chin correction can make the overall facial balance look different.

 

As shown in the attached photos, in male faces, when the chin tip becomes more refined, the lower face can gain a clearer center, making the face look less blurred and slightly sharper.

 

However, if filler is concentrated too much in the center of the chin tip, the chin can look pointed and unnatural.

If the chin is extended too much downward, the face can also look longer.

 

That is why the width and length of the chin tip should be assessed from the front, while forward support and the relationship with the lips should be evaluated from the side.

 

How do studies evaluate the effect of chin filler?

5.png

Marcus et al. Fig. 1
Chin retrusion responder rate graph

 

The graph above is Fig. 1 from a randomized trial published by Marcus and colleagues in Plastic and Reconstructive Surgery in 2022.

 

This study included men and women aged 22 or older with mild to moderate chin retrusion. A total of 107 participants were assigned to the hyaluronic acid filler treatment group, and 33 were assigned to the untreated control group in a 3:1 ratio.

 

The evaluation was based on the Galderma Chin Retrusion Scale, and participants who improved by at least one grade were defined as responders.

 

In the graph, the blue bars represent the HA filler treatment group, while the light blue bars represent the untreated control group.

 

At week 12, the responder rate was 86.1% in the treatment group and 6.5% in the control group.

At week 24, the rates were 85.7% in the treatment group and 6.7% in the control group.

At week 36, the rates were 77.6% in the treatment group and 19.2% in the control group.

At week 48, the rates were 73.7% in the treatment group and 11.1% in the control group.

 

In other words, the key point of this graph is that, in subjects with chin retrusion, chin augmentation using

hyaluronic acid filler showed a higher improvement rate than the control group not only at 12 weeks, but also up to 48 weeks.

 

The abstract of the paper also reports that the responder rate at week 12 was 81% in the HA filler group and 6% in the control group, and at week 48, it remained higher in the treatment group at 74% versus 11%.

 

This material helps explain that chin correction is not only a subjective impression-based procedure. It can also show meaningful change on a scale that evaluates the degree of chin retrusion.

6.png

Marcus et al. Fig. 3
Side-profile changes in male and female participants

 

In the before-and-after photos from the study, male, female, and middle-aged female cases are each shown from the side.

 

Each row shows the same person before and after treatment. You can see the chin tip changing from a retruded position to one with more forward support, which refines the side profile.

 

What is especially important in these photos is that we should not look at the chin tip alone.

 

We need to see how the side profile line connecting the nose, lips, and chin tip has changed.

 

Before treatment, in some cases, the line from below the lips to the chin tip appears recessed, and the endpoint of the lower face looks weak.

 

After treatment, the chin tip is supported forward, making the lower part of the face appear more stable and complete.

 

Ultimately, the key point of chin filler is not “making the chin bigger.” It is about creating the missing support point within the balance of the entire face.

 

Design points that must be checked in chin filler

7.JPG

The first point is the frontal proportion.

 

If the chin tip is too short from the front, the face can look round and somewhat compressed.

 

However, if the chin is made too long, the face can look elongated, or the chin tip may stand out separately in an unnatural way.

 

That is why the length of the lower face and the width of the chin tip should be assessed together.

The second point is the side profile.

 

From the side, the relationship between the nose, lips, and chin tip is important.

 

If the chin is set back, the mouth may look relatively more protruded.

 

When the chin tip is corrected appropriately, the side-profile balance can look slightly more stable.

8.png

The third point is the chin muscle.

 

The chin contains the mentalis muscle.

 

When this muscle is overly tense, wrinkles can form on the chin tip, or the chin can look uneven like a pebbled chin.

In this type of case, it may be necessary to assess muscle movement as well, rather than using filler alone.

 

The fourth point is the injection direction and support point.

 

Because the chin is an area where structure needs to be created, simply spreading filler widely in a superficial layer may not provide the desired support.

 

On the other hand, if too much filler is concentrated in one point, the chin tip may look sharp or artificial.

 

That is why, in chin filler, “where and in what direction the support point is created” is much more important than simply “how many cc were injected.”

 

Brief precautions

9.png

After chin filler, temporary swelling, bruising, tenderness, asymmetry, and unevenness can occur.

 

Most of these tend to improve with time. However, if severe pain persists, the skin becomes pale or mottled, or swelling and heat continue to worsen, the area should be checked immediately.

 

Although rare, filler procedures can cause vascular-related complications, so the chin should not be considered a risk-free area.

 

Immediately after the procedure, it is better to avoid pressing or massaging the chin strongly, sleeping face down, excessive exercise, sauna, and alcohol for a while.

 

The chin is also an area people tend to touch often, so right after the procedure, it is important to avoid repeatedly pressing or touching it to check the shape.

 

Before-and-after photos taken on the day of treatment may partially reflect the immediate injected volume and swelling, so it is better to observe how the final line settles over several days to one or two weeks.

 

To summarize, chin filler is not simply a procedure that makes the chin tip longer.

 

From the front, it helps define the center of the lower face. From the side, it helps balance the relationship between the lips and chin tip, and it can make the overall face shape look slightly more defined.

 

As shown in the attached before-and-after photos, when appropriate support is created at the chin tip, the lower part of the face can look more refined, and the lower facial line can become clearer from the side.

 

In the randomized trial by Marcus and colleagues, subjects with chin retrusion in the HA filler treatment group showed higher responder rates than the untreated control group at both 12 and 48 weeks. The before-and-after photos in the paper also showed improved forward support of the chin tip and changes in the side profile.

 

However, the same design does not suit every face.

 

We first need to assess whether the needed change is chin length, forward support, asymmetry correction, or control of muscle movement.

 

In the end, a good chin filler result does not come from injecting a large amount.

 

It comes from designing accurately in the direction that suits the face.

 

The chin tip is an area where even a small change can make the face shape look quite different.

 

That is why it is better to first structurally assess what kind of change your face actually needs before proceeding :)

 

This was Director Won Dae-han.

 

Thank you for reading.

 

Source:
https://pubmed.ncbi.nlm.nih.gov/36126213/

 

TOP

Journey of Beauty
PRIMI CLINIC

image
promo
  • KakaoTalk
  • Whatsapp
  • Blog Blog Blog
  • Phone
  • KakaoTalk
  • Whatsapp
  • Phone